110 of 282 M-SV-001-EN Rev. G
4.15.2.2 Verifying Soft Start Fuses
The instructions in this section cover the revision "S" and "T" Closed-Top Soft Starts.
NOTE
There are no serviceable fuses on Open-Top Soft Starts.
The Soft Start part numbers and revisions are identified by a label on the side of the Soft Start
mounting bracket. The Soft Start revision follows immediately after the 6-digit part number. Refer
to "Figure 4-100 Soft Start Label Location" for details on the location of the label and the revision
indicator.
Figure 4-100 Soft Start Label Location
Label
Location
220137T10986
Part Number Revision Letter
To Next Page
Loading...
