162 of 282 M-SV-001-EN Rev. G
10. Carefully lift the DC Bus Bars and capacitors out as an assembly. Do not remove the bleed
resistors, Balance Board, or capacitors from the bus bars. Refer to "Figure 4-190 Capacitor
Assembly Removal - TTS/TGS/TTH/TGH Rev. F and Earlier (Except TTS300/TGS230)" and "Figure
4-191 Capacitor Assembly Removal - TTS/TGS/TTH/TGH Rev. H (Except TTS300/TGS230)".
Figure 4-190 Capacitor Assembly Removal - TTS/TGS/TTH/TGH Rev. F and Earlier (Except TTS300/TGS230)
Figure 4-191 Capacitor Assembly Removal - TTS/TGS/TTH/TGH Rev. H (Except TTS300/TGS230)
To Next Page
Loading...
