Danfoss Turbocor TTS Series

51 of 282
M-SV-001-EN Rev. G
Chapter 4.0 Compressor Components
This section provides compressor component locations and functional descriptions, verification
and troubleshooting methods, cable connection identification, and steps necessary to replace a
component.
4.1 Component Identification
This section identifies the major parts of the compressor.
Figure 4-1 Compressor Components Identification (Covers On)
Table 4-1 Compressor Components (Covers On)
3
11
1
2
4
5
6
7
8
9
10
12
No. Component No. Component
1 Top Cover 7 Service Side Cover
2 Mains Input Cover 8 Rear Support Base
3 Lift Anchor (Front) 9 Compressor I/O Board
4 Cable Harness (Sensor) 10 Compressor I/O Board Cable
5 IGV Housing 11 End Cap
6 Front Support Base 12 Lift Anchor (Rear)