172 of 282 M-SV-001-EN Rev. G
16. Remove the Inverter cable harness from the top of the Inverter. Refer to "Figure 4-204 Inverter
Cable Harness Removal - TTS300/TGS230".
Figure 4-204 Inverter Cable Harness Removal - TTS300/TGS230
17. Disconnect all wiring connections from the DC-DC Converter. Refer to "Figure 4-205 Open-
Frame DC-DC" and "Figure 4-206 Potted DC-DC" for the connector locations.
Figure 4-205 Open-Frame DC-DC
Figure 4-206 Potted DC-DC
Harness Connector
J4 (24VDC)
J2 (250VDC)
J1 (DC Bus Input)
J3 (24VDC)
J4 (15VAC)
J2 (250VDC)
J1 (DC Bus Input)
To Next Page
Loading...
