Dexcom G5 - Page 110

Dexcom G5 Mobile System User Guide
108Calibration
(Continued from previous page)
Step What you see What you do Additional Info
4
Enter meter’s BG value
using number pad.
Tap Save .
Double-check your
numbers.
Entering wrong values,
or values taken more
than 5 minutes ago,
can affect the sensor’s
accuracy.
The default BG value is
your current reading if
available or 120 mg/dL.
5
Verify value is correct.
Tap Save .
If not correct:
Tap Cancel.
Reenter correct value.
N/A
(Continued on next page)