Chapter 4 -Operational Procedures-
148
AS-410M Auto Slide Preparation System
③ When you press the display item area in the sub screen, the line break position setting will be
switched in the order from the right end, the number of characters from the beginning, the
number of characters from the end, and line break at the specified characters.
④ When specifying the line break from the number of characters from either the beginning or end,
a numeric keypad will be indicated when you press the area for the number of characters from
either the beginning or end. Then enter the number.
⑤ To add a line break based on the specified characters, enter the word that a line break should be
added, and select the position where the new line should start.
例
＜Online Mode＞
⑥ Touch BACK to return to the “Maintenance mode” screen. Touch MAIN to return to the “MAIN”
screen.
<Print content setting>
Prints the facility name
Prints 2D code
Online print setting screen
（
Print contents
）
Prints each item set with
the LK-400
PC.
Choose items to be
printed.
Line break at the right end
Specify with the number of
characters from the beginning
Specify with the number of
characters from the end
Line break at the specified
characters (Upper line)
Line break at the specified
characters (Lower line)
Line break at the specified
characters (Delete)
Upper line
Lower line
Delete
To Next Page
Loading...
Need help?
General