1. Shake the tire sealer well before use, and
remove the red valve safety cap on the top of the
tire repair tool;
2. Align the connecting valve of the tire repair
tool with the tire valve and tighten it, turn the red
valve clockwise and put the bottle upside down
to start inflating and repairing the tire;
3. After the tire sealer is added, close the red
valve counterclockwise, screw out the
connecting valve, and remove the tire repair tool.
4. Immediately drive the vehicle for a period of
time to complete the repair. The best effect can
be achieved after the vehicle is driven for more
than 10km.
The emergency tire repair is only performed
in emergency. After emergency tire repair,
the vehicle speed shall not be higher than
80km/h. Please drive to the nearest
authorized dealer for repair as soon as
possible.
To Next Page
Loading...