DongFeng Huge - Rear Seat

Safe ride
- 31 -
Preparation before driving
1
Rear seat
Rear seat center armrest*
To use the rear seat center armrest, pull the
armrest strap in the middle position on the rear
seat back to the lowest position.
Rear seat headrest
The rear seats are equipped with 2 or 3
headrests, and some of them are vertically
adjustable and removable.
The methods for height adjustment, removal and
installation of rear seat headrest are the same as
that of front seat.
Seat back reclining
The angle of rear seat backs can be adjusted as
follows:
1. Pull up the upper locking handle on the outer
side of the seat back to the limit position (as
arrowed in the figure) and release it until the
corresponding seat back is completely unlocked.
2. Push the seat back forward or backward,
adjust the seat back to the required angle, and
make sure that it is locked firmly.
3. Adjust the angle of the rear seat back on the
other side in the same way.
CAUTION
● Make sure there are no obstacles in the
trunk when adjusting the rear seat back
angle, for fear of damaging items or
seats.
● After adjusting the angle of the rear seat
back, push the rear seat back forward and
backward to confirm that the seat back is
locked firmly.