EasyManua.ls Logo

DongFeng Huge - HVAC (Automatic A;C)

DongFeng Huge
290 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjustment before driving
- 58 -
Preparation before driving
1
HVAC (automatic A/C)*
Button control of control panel
Fan speed control/A/C Off knob
Automatic mode (AUTO) button
Air outlet mode button
“A/C” button
Recirculation/fresh air mode button
Front windshield defogger button
Rear windshield defroster button
Temperature control knob
WARNING
Do not leave children or adults that need
to be taken care, and any pets alone in
the vehicle. They may activate switches
or controllers accidentally, resulting in a
serious accident, even death.
In hot and sunny weather, the
temperature inside the vehicle will rise
rapidly in a closed environment, which
may cause serious or even fatal injury to
people or animals.
Do not adjust the HVAC during driving in
order to be able to concentrate on driving.
The HVAC works only when the engine is running. As long as the ENGINE START/STOP button
is in the “ON” position, even when the engine is shut down, the air volume can still be adjusted
through the fan speed control button.
When the engine is not running, do not keep the A/C fan operating for a long time to avoid
excessive consumption of battery power.
To realize quick cooling off inside the vehicle in hot summer, please open the windows for
ventilation first, then turn on the A/C, set the temperature to the lowest and the air volume to the
maximum, select the panel mode, and when the appropriate temperature is reached, adjust to the
desired temperature and air volume.
The air quality inside the vehicle will be poor if the recirculation mode is used for a long time, so
please use the fresh air mode under normal circumstances. Please try not to smoke inside the
vehicle in order to ensure fresh air.
In rainy and cold weather, prolonged use of the recirculation mode may cause fogging on the
windows.
During cooling, water vapor in the air condenses and then the condensate water is discharged
through the pipe. Therefore, there will be a puddle of water underneath the vehicle when the
vehicle stops, which is a normal phenomenon.

Table of Contents

Related product manuals