Preparation before driving
Folding rear seats
The rear seats can be folded by the split
proportion of 6:4, and the rear seats can be
folded fully to expand the trunk space.
● After restoring of the rear seat back, push
the rear seat back backward and forward
to verify that the seat back is securely
locked.
● When restoring the seat, place the seat
belts on both sides to prevent them from
being caught in the seat.
Folding steps for rear seats
1. Move the front seat forward to the limit;
2. Adjust the rear seat headrest to the lowest
position;
3. Pull up the upper locking handle on the outer
side of the seat back to the limit position (as
arrowed in the figure), and pull the seat back
forward at the same time;
4. Move the seat belt aside, tilt the rear seat
back forward until it is tilted to the lowest
position.
5. Repeat steps 1, 2, 3 and 4 to complete the
folding of the rear seat on the other side.
To Next Page
Loading...