Every 7,500km or 6 months
(whichever comes first)
Front and rear brakes and related components (tightening, wear, aging
or oil leakage)
Vacuum air intake pipe, brake pipe (connection, wear, fixing, leakage,
aging)
Wheel condition (fastening, wear, aging, tire pressure etc., including
spare wheel)
Tire inspection (dynamic balance and repair as appropriate)
Working conditions of instrument panel and indicator lamps on it and
resetting of maintenance mileage
Working conditions of interior and exterior lamps
Seat belts, buckles, retractors, fixing bolts and regulator
Visual conditions of door handles and body
Door locks, hinges, door stops, engine hood latch and trunk lid lock
Reading and clearing of vehicle DTCs
Inspection of after-market parts installation, modification of vehicle (if
any, record it)
Brake pedal (nut tightening, switch sticking)
Electric vacuum pump (function, fixing)
In the table, I=Inspection, after inspection, if cleaning, adding, adjustment, lubrication, repair or replacement is required, follow the relevant processes;
R=Replacement, L=Lubrication, C=Clean; /=No operation.