Preparation before driving
Driver's seat headrest
Adjusting headrest upward
Pull the headrest up with both hands, and when
the desired height is reached, press the headrest
down to check that the headrest is locked.
Adjusting headrest downward
Press the headrest locking button, and press the
headrest down to the desired height. Release
the headrest locking button, and press the
headrest down to check that the headrest is
locked.
Removing headrest
Pull the headrest up to the limit, and press down
the headrest locking button to pull out the
headrest.
Installing headrest
Align the support rod with the hole on the seat
back, press the headrest locking button and
press the headrest down to the desired position,
and then check whether the headrest is locked
securely.
● Drivers are not allowed to adjust seat or
headrest during driving.
● Never drive the vehicle when the driver’s
seat is not provided with a headrest.
● Always adjust the headrest to the
appropriate height, otherwise in the event
of a collision, serious injury to head and
neck and even death may be caused.
Appropriate height of seat headrest
The most appropriate and safest headrest height
is such a position that the center of the headrest
is flush with the center of the ear.