C
HAPTER
3
| Using the Web Interface
Navigating the Web Browser Interface
– 80 –
Priority
Default Priority Sets the default priority for each port or trunk 221
Queue Sets queue mode for the switch; sets the service weight for each
queue that will use a weighted or hybrid mode
222
Trust Mode Selects DSCP or CoS priority processing 228
DSCP to DSCP 229
Add Maps DSCP values in incoming packets to per-hop behavior and
drop precedence values for internal priority processing
229
Show Shows the DSCP to DSCP mapping list 229
CoS to DSCP 232
Add Maps CoS/CFI values in incoming packets to per-hop behavior and
drop precedence values for priority processing
232
Show Shows the CoS to DSCP mapping list 232
PHB to Queue 225
Add Maps internal per-hop behavior values to hardware queues 225
Show Shows the PHB to Queue mapping list 225
DiffServ 235
Configure Class 236
Add Creates a class map for a type of traffic 236
Show Shows configured class maps 236
Modify Modifies the name of a class map 236
Add Rule Configures the criteria used to classify ingress traffic 236
Show Rule Shows the traffic classification rules for a class map 236
Configure Policy 239
Add Creates a policy map to apply to multiple interfaces 239
Show Shows configured policy maps 239
Modify Modifies the name of a policy map 239
Add Rule Sets the boundary parameters used for monitoring inbound traffic,
and the action to take for conforming and non-conforming traffic
239
Show Rule Shows the rules used to enforce bandwidth policing for a policy map239
Configure Interface Applies a policy map to an ingress port 249
VoIP Voice over IP 251
Configure Global Configures auto-detection of VoIP traffic, sets the Voice VLAN, and
VLAN aging time
251
Configure OUI 253
Add Maps the OUI in the source MAC address of ingress packets to the
VoIP device manufacturer
253
Show Shows the OUI telephony list 253
Table 4: Switch Main Menu (Continued)
Menu Description Page
To Next Page
Loading...
Need help?
General