3
Using This Manual
The Edwards HemoSphere advanced monitor operator’s manual is comprised of eleven chapters, eight appendices, and
an index. Figures in this manual are intended for reference only and may not be an exact replication of the screens as a
result of continuous software improvements.
WARNING Read this operator's manual carefully before attempting to use the Edwards
HemoSphere advanced monitor.
Refer to the instructions for use provided with each compatible accessory before using
it with the HemoSphere advanced monitor.
CAUTION Inspect the HemoSphere advanced monitor and all accessories and equipment used
with the monitor for damage prior to use. Damage may include cracks, scratches, dents,
exposed electrical contacts, or any signs that the housing may be compromised.
WARNING To prevent injury to patient or user, damage to platform, or inaccurate measurements,
do not use any damaged or non-compatible platform accessories, components or
cables.
Chapter Description
1 Introduction: Provides an overview of the HemoSphere advanced monitor
2 Safety and Symbols: Includes WARNINGS, CAUTIONS, and NOTES that are
found in the manual, as well as illustrations of labels found on the HemoSphere
advanced monitor and accessories
3 Installation and Setup: Provides information about setting up the HemoSphere
advanced monitor and connections for the first time
4 HemoSphere Advanced Monitor Quick Start: Provides experienced clinicians
and users of bedside monitors instructions for immediate monitor use
5 Navigating the HemoSphere Advanced Monitor: Provides information on
monitoring screen views
6 User Interface Settings: Provides information about the various display settings
including patient information, language and international units, alarm volume,
system time, and system date. It also provides instructions for selecting the
screen appearance
7 Advanced Settings: Provides information on advanced settings including alarm
targets, graphical scales, serial port setup, and Demo Mode
8 Data Export and Connectivity: Provides information on monitor connectivity for
transferring patient and clinical data
9 HemoSphere Swan-Ganz Module Monitoring: Describes procedures for setup
and operation of continuous cardiac output, intermittent cardiac output, and right
ventricular end diastolic volume monitoring using the Swan-Ganz module
10 HemoSphere Pressure Cable Monitoring: Describes procedures for setup and
operation of vascular pressure monitoring
11 Oximetry Monitoring: Describes procedures for calibration and operation of
oximetry (oxygen saturation) measurement
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...
Need help?
General
