Edwards HemoSphere

104
HemoSphere Advanced Monitor 7 Advanced Settings
NOTE Visual and audible alarm settings are only applicable to parameters being displayed.
To modify Alarms / Targets:
1 Touch the settings icon .
2 Touch Advanced Setup button and enter the required password.
3 Touch Parameter Settings button  Alarms / Targets button.
4 Touch anywhere in a parameter box to display the Alarms / Targets popup for the parameter.
NOTE There is a 2 minute inactivity timer associated with this screen.
The red, yellow and green rectangles are fixed shapes, and don’t change size / shape.
7.1.5 Configure All Targets
Targets can easily be configured or changed all at the same time. From the Configure All screen, the user can:
• Set Custom Defaults for all parameter alarm and target settings.
• Restore all parameter alarm and target settings to Custom Defaults.
• Restore all parameter alarm and target settings to Edwards Defaults.
• Enable or disable audible alarms for all applicable parameters.
• Enable or disable target ranges for all parameters.
1 Touch the settings icon .
2 Touch Advanced Setup button and enter the required password.
3 Touch Parameter Settings button  Alarms / Targets button.
Figure 7-1 Alarms / Targets configuration
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14