148
HemoSphere Advanced Monitor 11 Oximetry Monitoring
3 Once the patient has been transferred, reconnect the oximetry cable to the HemoSphere advanced
monitor and turn it on.
4 Touch clinical actions icon Oximetry Calibration icon .
5 Touch Recall Oximetry Data button.
6 If the oximetry cable data is less than 24 hours old, touch Yes button to start oximetry monitoring
using the recalled calibration information.
OR
Touch No button and perform an in vivo calibration.
WARNING Before touching Yes to recall oximetry data, confirm that the displayed data matches
the current patient. Recalling incorrect oximetry calibration data and patient
demographics will result in inaccurate measurements.
CAUTION Do not disconnect the oximetry cable while calibration or data recall are in process.
7 From the oximetry calibration menu, touch In vivo Calibration button to recalibrate the cable.
To review patient data that was transported with the oximetry cable, touch the settings icon .
8 Touch Patient Data button.
CAUTION If the oximetry cable is being transferred from a HemoSphere advanced monitor to
another HemoSphere advanced monitor, check that the patient height, weight, and BSA
are correct prior to beginning monitoring. Re-enter patient data, if necessary.
NOTE Keep the time and date of all HemoSphere advanced monitors current. If the date and/
or time of the HemoSphere advanced monitor being transported “from” differs from
the HemoSphere advanced monitor being transported “to” the following message may
appear:
“Patient data in oximetry cable more than 24 hours old - Recalibrate.”
If the system needs to be recalibrated, a 10 minute warm up period for the oximetry
cable may be required.
11.6 HGB Update
Use the HGB Update option to adjust the HGB or Hct value of a previous calibration. The update function
can be used only if a previous calibration has been performed, or if the calibration data has been recalled
from the oximetry cable.
1 Touch clinical actions icon Oximetry Calibration icon .
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...