43
HemoSphere Advanced Monitor 3 Installation and Setup
WARNING Shock hazard! Do not attempt to connect/disconnect system cables while hands are
wet. Ensure that hands are dry prior to disconnecting system cables.
CAUTION Always grasp the connector, not the cable, when connecting or disconnecting cables.
Do not twist or bend the connectors. Confirm that all sensors and cables are connected
correctly and completely before use.
To avoid corruption of data on the HemoSphere advanced monitor, always disconnect
the patient CCO cable and oximetry cable from the monitor before using a defibrillator.
3.2 HemoSphere Advanced Monitor Connection Ports
The following monitor views illustrate the connection ports and other key features of the front, rear, and
side panels of the HemoSphere advanced monitor.
3.2.1 Monitor Front
Figure 3-1 HemoSphere advanced monitor front view
visual alarm indicator
power button
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...