Edwards HemoSphere

80
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
5.4 Clinical Actions
Most options on the clinical actions menu are related to the current monitoring mode (e.g., while monitoring
with the HemoSphere Swan-Ganz module). The following clinical actions are available across all monitoring
modes.
5.4.1 Select Monitoring Mode
The Select Monitoring Mode page allows the user to switch between monitoring modes. This screen will
appear after new patient data is entered and before a new monitoring session is started. This screen can also
be accessed by:
a touching the monitoring mode on the information bar
OR
b touching the clinical actions icon  Select Monitoring Mode icon
From this screen, the user can select from connected monitoring technologies. Oximetry monitoring is
available across all monitoring modes.
NOTE Only one monitoring mode switch is available for each patient monitoring session. For
additional monitoring mode switches, a new patient monitoring session must be started.
See New Patient on page 88.
Minimally-Invasive Monitoring Mode Button. The user can select this button for minimally-
invasive hemodynamic monitoring using the HemoSphere pressure cable. The primary
monitoring technology is with the FloTrac system and therefore FloTrac appears on the
information bar while in this monitoring mode. Monitoring with a TruWave DPT is also
available while in this mode.
Invasive Monitoring Mode Button. The user can select this button for invasive
hemodynamic monitoring using HemoSphere Swan-Ganz module monitoring. Swan-Ganz
appears on the information bar while in this monitoring mode.
Touch the home icon to continue with the selected monitoring mode. The letter “S” ( ) will appear
on the x-axis of the graphical trends monitoring view at the point in time when the monitoring mode switch
occurred.
5.4.2 Historical Graphical Trends
This clinical actions menu option is available if a monitoring mode switch has occurred during the current
patient monitoring session. See Select Monitoring Mode on page 80 for information on switching monitoring
modes.
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14