Edwards HemoSphere

84
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
table 8-1 on page 113 for Wi-Fi status symbols and table 8-2 on page 114 for HIS connectivity status
symbols. Figure 5-19 shows an example of an information bar while monitoring with the HemoSphere
Swan-Ganz module with a slaved in ECG heart rate. Figure 5-20 shows an example of an information bar
while monitoring with the HemoSphere pressure cable with the HPI feature activated.
NOTE Figure 5-19 and figure 5-20 are examples of information bars with U.S. standard
defaults. To see the defaults for all languages, see table D-6, “Language default settings,”
on page 208.
5.5.1 Battery
The HemoSphere advanced monitor allows for uninterrupted monitoring during power loss when the
HemoSphere battery pack is installed. Battery life is indicated on the information bar by the symbols shown
in table 5-5. For more information on battery installation, see Battery Installation on page 47. To ensure that
the battery charge status displayed on the monitor is correct, it is recommended to perform periodic checks
of battery health through battery conditioning. For information on battery maintenance and conditioning,
see Battery Maintenance on page 216.
Figure 5-19 Information Bar - HemoSphere Swan-Ganz Module
Figure 5-20 Information Bar - HemoSphere Pressure Cable
Table 5-5 Battery status
Battery
symbol
Indication
The battery has greater than
50% charge remaining.
The battery has less than 50%
charge remaining.
The battery has less than 20%
charge remaining.
The battery is charging and
connected to mains power.
Time Date
Battery
Monitoring
Mode
Averaged
Heart Rate
Blood
Temperature
HIS
Status
Wi-Fi
Status
Lock
Screen
Time Date
Battery
Monitoring
Mode
Averaging
Time
HIS
Status
Wi-Fi
Status
Lock
Screen
HPI
Parameter
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14