110
HemoSphere Advanced Monitor 7 Advanced Settings
When Demo Mode is entered, trended data and events are cleared from being displayed and saved for return
to patient monitoring.
1 Touch settings icon .
2 Touch the Demo Mode button.
NOTE When the HemoSphere advanced monitoring platform runs in Demo Mode, all
audible alarms are disabled
3 Select the demonstration monitoring mode:
Swan-Ganz: See chapter 9: HemoSphere Swan-Ganz Module Monitoring for details on monitoring
with the HemoSphere Swan-Ganz module and Swan-Ganz module monitoring mode.
FloTrac: See chapter 10: Monitoring with the HemoSphere Pressure Cable for details on monitoring
with the HemoSphere pressure cable and FloTrac sensor monitoring mode.
4 Touch Yes on the Demo Mode confirmation screen.
5 The HemoSphere advanced monitoring platform must be restarted prior to monitoring a patient.
WARNING Make sure that Demo Mode is not activated in a clinical setting to ensure that simulated
data is not mistaken for clinical data.
7.5 Engineering
The engineering menu can only be operated by a system engineer and is password protected. If an error is
encountered, start by referring to chapter 13: Troubleshooting .
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...