66
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
5.3.1 Parameter Globes
Parameter globes are located on the right side of most monitoring screens. The cockpit and big numbers
monitoring views are composed of larger format parameter globes which function identically as described
below.
5.3.1.1 Change Parameters
1 Touch the displayed parameter label located outside the globe to change it to a different parameter.
2 A popup window will show the selected parameter highlighted in color and other parameters
currently being displayed outlined in color. Available parameters appear on the screen without
highlights. Figure 5-4 shows the popup window that will appear while selecting continuous
parameters and monitoring with the HemoSphere Swan-Ganz module.
3 Touch an available parameter to select the replacement parameter.
5.3.1.2 Change Alarm/Target
The Alarms / Targets popup screen lets the user view and set up alarm and target values for the selected
parameter or enable/disable the audible alarm and target settings. Additionally, the target settings can be
adjusted with a numbered key pad or with the scroll buttons when a minor adjustment is needed. This popup
screen is accessed by touching anywhere inside a monitored parameter globe or through the parameter
settings screen. For more information, see Alarms / Targets on page 100.
NOTE There is a two minute inactivity timer associated with the popup screen.
The alarms limits and target ranges for the Hypotension Probability Indicator, P(
↓BP),
are not adjustable.
Figure 5-4 Example of key parameter
selection popup window
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...