Edwards HemoSphere

94
HemoSphere Advanced Monitor 6 User Interface Settings
1 Touch the settings icon .
2 Touch the Monitor Settings button.
3 Touch the Monitoring Screens button.
4 Select the Indexed or Non-Indexed toggle for parameters in the physiology and physio
relationship screens.
5 To turn the SVV indicator On or Off, touch the SVV: Physiology and Physio Relationship
Screens toggle button.
6 To turn PPV data On or Off, touch the PPV: Physiology and Physio Relationship Screens
toggle button.
7 Touch the home icon to return to the monitoring screen.
6.2.4 Time Intervals / Averaging
The Time Intervals / Averaging screen lets the user select the continuous % change time interval. During
FloTrac sensor monitoring mode, the user can also change the CO/pressure averaging time.
NOTE The screen will return to the monitoring view after two minutes of inactivity.
The CO/Pressure Averaging Time value button is only available in FloTrac sensor
monitoring mode.
1 Touch the settings icon .
2 Touch Monitor Settings button.
3 Touch Time Intervals / Averaging button.
4 Touch the right side of the Continuous % Change Interval value button and touch one of the
following time interval options:
• None • 15 min
• 5 min • 20 min
• 10 min • 30 min
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14