85
HemoSphere Advanced Monitor 5 Navigating the HemoSphere Advanced Monitor
WARNING To prevent any interruptions to monitoring during power loss, always use the
HemoSphere advanced monitor with the battery inserted.
In cases of power failure and battery depletion, the monitor will go through a controlled
shut off procedure.
5.5.2 Lock Screen
If the monitor is being cleaned or moved, lock the screen. For cleaning instructions refer to Cleaning the
Monitor and Modules on page 212. The screen will automatically unlock once the internal timer has counted
down.
1 Touch the lock screen icon.
2 Touch the time that the screen will remain locked on the Lock Screen popup.
3 A large lock icon will appear to the right of the information and status bar.
4 To unlock the screen, touch and hold the large lock icon .
The battery is fully charged and
connected to mains power.
The battery is not installed.
Figure 5-21 Lock screen
Table 5-5 Battery status (continued)
Battery
symbol
Indication
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...