Edwards HemoSphere

113
HemoSphere Advanced Monitor 8 Data Export and Connectivity Settings
1 Touch the settings icon .
2 Touch the Advanced Setup button.
3 Enter Advanced Setup Password. See service manual for clinician passcode.
4 Touch Clear Data and Settings button.
5 Touch Restore Factory Defaults button.
6 A confirmation screen appears. Touch Yes to continue.
7 Turn the monitor power off and then follow the start-up process.
8.3 Wireless Settings
The HemoSphere advanced monitor can connect to available wireless networks.
1 Touch the settings icon .
2 Touch the Advanced Setup button and enter password. Contact your Edwards representative for
more information on this advanced feature.
3 Touch the Wireless button.
4 Select the desired wireless network from the list of available connections and enter the password
if required.
NOTE Do not connect to an unrecognized or unsecured network. See Cyber Security on
page 116.
Wi-Fi connection status is indicated on the information bar by the symbols shown in table 8-1.
Table 8-1 Wi-Fi connection status
Wi-Fi Symbol Indication
very high signal strength
medium signal strength
low signal strength
very low signal strength
no signal strength
no connection
!
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14