91
HemoSphere Advanced Monitor 6 User Interface Settings
6.2 Monitor Settings
The Monitor Settings screen allows the user to change several monitor related settings.
NOTE The screen will return to the monitoring view after two minutes of inactivity.
6.2.1 General Monitor Settings
The General Monitor Settings are those that affect every screen. These are the display language, units used,
alarm volume, and snapshot sound.
The HemoSphere advanced monitor interface is available in several languages. A language selection screen
appears the first time the HemoSphere advanced monitor is started. See figure 3-7, “Language selection
screen,” on page 51. The language screen will not appear again, but the display language can be changed at
any time.
The selected language determines the default time and date format. These can also be changed
independently of the language selected.
NOTE If power is lost and restored to the HemoSphere advanced monitor, the system settings
prior to the power loss, including alarm settings, alarm volume, target settings,
monitoring screen, parameter configuration, language and unit selection, are automati-
cally restored to last configured settings.
6.2.1.1 Change Language
1 Touch the settings icon .
2 Touch the Monitor Settings button.
Figure 6-3 Monitor Settings
Status = Released Printed Date: 2018-01-16 Released Date: 2017-09-14
To Next Page
Loading...
Need help?
General
