X-STREAM
5-24
Instruction Manual
HASAxE-IM-HS
05/2006
Emerson Process Management GmbH & Co. OHG
5-4-3-1-2 Menu Access Setup Menu
Use lines 1 to 3 to specify if the related access
level is protected by code or not:
Off: Menu access is not protected.
On: Access code must be entered for related
menus (code 3 = level 3, ..).
Note!
Setting the status of a lower level to "On" auto-
matically sets all higher level states to "On"!
Setting the status of a higher level to "Off"
automatically sets all lower level states to "Off"!
If system is setup accordingly access level 3
code must be entered to access this menu.
5-4 Menu System - Display Setup Menu
The entry in this line defines how unlocked
menus are locked again to reestablish the
securitiy level.
Available options:
On : lock all security enabled levels upon
returning to the measuring screen
1 min: lock all security enabled levels 1min
after the last user action
Never: no action (menus remain unlocked)
Note:
Selecting the menu function "Lock menus ! "
in the "Control" menus will immediately lock
enabled menus.
Specify the access codes to be entered for
the related access levels.
Figure shows the factory default settings.
We recommend changing the
default settings when making
use of access codes!
Setup..
Display..
Menu access..
2
nd
menu page
1
st
menu page
Code 1: Off
Code 2: Off
Code 3: Off
Activate: On
Code 1: 00000001
Code 2: 00000002
Code 3: 00000003
To Next Page
Loading...
Need help?
General
