X-STREAM
4-1
Instruction Manual
HASAxE-IM-HS
07/2006
Emerson Process Management GmbH & Co. OHG
4 Installation
Chapter 4
Installation
This chapter describes how to install the diffe-
rent analyzer models in a safe manner and
gives instructions on what to care about.
Carefully examine the shipping carton and contents for signs of damage.
Immediately notify the shipping carrier if the carton or its contents are damaged.
Retain the carton and packing material until the instrument is operational.
4-1 Abstract
ELECTRICAL SHOCK HAZARD!
Prior to connecting the analyzer to power ensure all safety instructions
as given in the appropriate chapter at the beginning of this manual and
in the following analyzer refered sections are read and unterstood!
Installation area has to be clean, free from
moisture, excessive vibration and frost-
protected. Take care to meet the permissible
ambient temperatures as given in the techni-
cal data section!
Instruments must not be exposed to direct
sunlight nor sources of heat.
For outdoor installation it is recommended
to mount the instruments into a cabinet. At
least sheltering against rain is recommended.
To Next Page
Loading...
Need help?
General
