X-STREAM
Emerson Process Management GmbH & Co. OHG 6-3
Instruction Manual
HASAxE-IM-HS
05/2006
6 Initial Startup
Sequence of keys to be entered for chan-
ging the language of an analyzer, if the
operator is not competent in the currently
setup language
(Sequence starting from the measuring screen)
6-2 Checking the Instrument's Setup
The DOWN key changes the language. After
pressing the ENTER key this language is
set and the menu's language is updated
immediately.
If the selected language is not the one desired,
repeat the sequence of last three keys multiple
times until the desired language is set.
Note!
After pressing the ENTER key the 4
th
time
within this sequence you entered the
LANGUAGE parameter line.
6-2-1 Instrument's Language Setup
To Next Page
Loading...
Need help?
General
