Section 6 — Standard Sound Parameters
ENSONIQ KT Musician’s Manual 7
Edit Sound
page 05
Voice Restrike Decay Time
Voice Restrike
Decay Time = 3
Voice Restrike Decay Time Range: 0 to 7
This parameter controls the voice Restrike time. When you play a particular note and then strike
it again immediately before the old note has finished sounding, the amount of time it takes for
the first strike to fadeout is determined by this parameter. By varying the setting of this
parameter, you can control how long sounds overlap when a note is restruck.
For example, if you have a slow string sound, it may sound more natural to use a longer restrike
value, which will cause the old note to decay more slowly, rather than end abruptly when the
new note starts. Normal values are around 3. The higher the value, the longer the fadeout time.
Tip: If you hear clicking sounds when you restrike a note, setting the Restrike time
to higher values may eliminate the click.