Section 10 — Understanding the Sequencer
6 ENSONIQ KT Musician’s Manual
Select Sequence Mode Pages
Pressing the {SELECT_SEQ/PRESET} button puts the KT into Select Sequence/Preset mode.
Repeatedly pressing the {BANK} button will scroll through the different sequencer memory
banks: i:INT (RAM), r:ROM, a:CARD, or b:CARD. The {0} to {9} buttons will now select
Sequence/Preset or Song pages. Pages 00 to 69 contain sequences/presets, while pages 70
through 99 hold the songs. Each page contains a sequence/preset or song location that can be
selected by pressing an upper {0} to {9} button for the first digit, and then a lower {0} to {9}
button for the second digit.
Location of sequence
m m
iSEQ 00 Tempo120 Seq/Preset-00
i
Name of sequence/preset
Preset/Sequence Locations 00 to 69 that have not yet been defined show:
Press ENTER to Make new Pset=##
i
empty location selected
Song Locations 70 to 99 that have not yet been defined show:
Press ENTER to Make new Song=##
i
empty location selected
• Pressing {ENTER} will initiate the Make new Preset or Make new Song function (see
Creating a New Sequence or Song, later in this section).
• Pressing {NO} will redisplay the name page for the currently selected
Preset/Sequence/Song.
Selecting a Sequence or Song
1. Press the {SELECT_SEQ/PRESET} button to enter Select Sequence/Preset mode.
2. Repeatedly press the {BANK} button to select the appropriate bank.
3. Press a top {0} to {9} button to select the first digit of the Sequences/Presets and Song page.
4. Press a bottom {0} to {9} button to select the second digit of the page.
To Next Page
Loading...
Need help?
General
