ENSONIQ KT-88 Musician's Manual

Section 4 — Effect Parameters
ENSONIQ KT Musician’s Manual 7
EQ-DDL+REVERB
Combines a parametric EQ and digital delay, with reverb.
L
R
Reverb
Mix1
Mix2
Audio
Outputs
EQ DDL
FX1
FX2
DRY
EQ-DDL+REVERB Routing
DDL
Regen
L Output
FX1 Right
L
R
FX1 Left
R Output
Digital Delay Routing
FX1 F Gain
BW Out
See the description in the Dual EQ+Reverb algorithm.
DDL Time L and R Ranges: 0 to 700 msec
Sets the delay time for the delays. Experiment with different delay times to find the right setting
for your application. See the Delay Times/BPM Chart in Section 10 — Understanding the Sequencer
for help in setting the delay times to the tempo of a sequence.
DDL Regen Range: -98 to +98
Controls the amount of regeneration applied to the delay time taps. This affects how long the
echoes continue to repeat. Positive or negative values can affect the spatial (phase) relationship
of the delay times.
DDL Send Range: 00 to 99
Adjusts the input level to the delay. A level of 00 will offer no audible delay. Try modulating
this parameter with the mod wheel or pressure to selectively choose which notes will echo.
Rev Decay Bias
See the description in the Dual EQ+Reverb algorithm.
Modulation Destinations
FX1-MIX FX2-MIX EQ FREQ EQ GAIN
EQ BW EQ OUT DDL L DDL R
DDL RGN SEND DECAY

ENSONIQ KT-88 Specifications

General

Brand	ENSONIQ
Model	KT-88
Category	Keyboard
Language	English