Section 7 — Drum Sound Parameters
6 ENSONIQ KT Musician’s Manual
Edit Sound
page 02
Direction
Direction=FORWRD
Direction Range: FORWRD or BACKWD
This parameter determines the direction a wave will play, either forward or backward.
Edit Sound
page 03
Press ENTER to Set GM Map
Press ENTER to Set GM Map
This command erases the key map currently residing in the edit buffer, setting all the voices to a
key range of A0-A0 (i.e. unassigned) and revealing the entire “hidden” ROM General MIDI
Drum Map that resides underneath the 17 drum voices.
To reveal the “hidden” General MIDI Drum Map:
• From this page, press {ENTER}.
The display momentarily shows “Command successful!” and then returns to Edit (Drum)
Sound page 00.
Because all of the voices are set to a key range of A0-A0, playing the keyboard fails to recognize
these ranges, and the display shows incongruous information as you play. As a result the wave
name that you see and the wave that you hear may not be the same. The following diagram
shows the “hidden” General MIDI Drum map. Note that keys outside of the General MIDI range
are silent.