Section 7 — Drum Sound Parameters
8 ENSONIQ KT Musician’s Manual
Edit Sound
page 04
Press ENTER to Set Ensoniq Map
Press ENTER to Set Ensoniq Map
This command erases the key map currently residing in the edit buffer, setting all the voices to
the 17-voice default ENSONIQ drum map. This ENSONIQ drum map completely covers up the
“hidden” ROM General MIDI drum map. The illustration below shows the default ENSONIQ
drum map settings:
MISC. PERCUSSION
Default ENSONIQ Drum Map
General Drum Types
BRIGHT KICK
REAL SNARE
TOM TOMS
CYMBALS
KICK DRUMS
SNARE DRUMS
HI-HATS
RIDE
CYMBAL
OPEN HAT 1 -KG1
CLOSED
HAT 2-KG1
CLOSED
HAT 1-KG1
OPEN
HAT 2 -KG1
PEDAL
HAT -KG1
CRASH
CYMBAL
CHINA
CYMBAL
DRY
TOM
DRY
TOM
DRY
TOM
DRY
TOM
SIDESTICK 1
TAMBOURINE
SYNTH
CLAPS
To Set all Voices to the ENSONIQ Drum Map:
• From this page, press {ENTER}.
The display momentarily shows “Command successful!” and then returns to Edit (Drum)
Sound page 00.
Edit Sound
page 05
Change Sound mode
Change Sound mode
This command allows you to switch the current sound mode between Drum Sounds and Standard
Sounds. When working in Edit (Drum) Sound mode, this command will place the default
Standard sound into the edit buffer, and place the KT into Edit (Standard) Sound mode.
To Change the Current Sound Mode:
• Press {ENTER}. The display momentarily shows “Command Successful!” changes between
modes, and then displays Edit Sound page 00.
To Next Page
Loading...
Need help?
General
