ENSONIQ KT-88 Musician's Manual

Section 2 — System•MIDI Parameters
ENSONIQ KT Musician’s Manual 15
System•MIDI
page 7
Controllers/Prog Change
Controllers= OFF Prog Change= OFF
Controllers Range: OFF or ON
This controls whether the KT will send and receive MIDI controllers — pitch bend, mod wheel,
volume, sustain pedal, etc. This parameter does not affect how controllers function for local
sounds.
• OFF — the KT will not send or receive any MIDI controllers.
• ON — the KT will send and receive MIDI controllers.
Prog Change Range: OFF or ON
This controls how the KT handles MIDI program change messages.
• OFF — the KT will not transmit or receive MIDI program changes or MIDI Bank Select
messages.
• ON — the KT will transmit and receive program changes and Bank Select messages over
MIDI.
Program Changes in the KT
The sounds in all banks are assigned MIDI Bank Select numbers and program numbers. The
KT’s MIDI Out will send the appropriate MIDI Bank Select message whenever the bank (i:INT,
r:ROM, a:CARD, or b:CARD) is changed.
• Internal RAM sounds (i:INT banks) are numbered from 001 to 079.
• r:ROM sounds are also numbered from 001 to 079.
• Card sounds (a:CARD or b:CARD banks) are numbered from 001 to 079.
• The r:DRUM ROM sounds are numbered from 080 to 099.

ENSONIQ KT-88 Specifications

General

Brand	ENSONIQ
Model	KT-88
Category	Keyboard
Language	English