ENSONIQ KT-88 Musician's Manual

Section 1 — Controls & Basic Functions
14 ENSONIQ KT Musician’s Manual
Choosing Internal, ROM, and Card Sounds
In Select Sound mode, the display shows the bank and page location, and the name of the sound:
Bank Location Page Location
m m
r:ROM 00
KT Grand Piano
i
Sound Name
There are two methods that can be used to choose between the four banks:
• The {BANK} button — Repeatedly pressing the {BANK} button will step through the various
banks.
• Direct-Dialing — You can reach any of the banks directly by pressing the {BANK} button,
and while continuing to hold the {BANK} button down, press one of the lower {0} to {3}
buttons.
Select
Sound
1 2 3 4 5 60 7 9
8
Bank
i
r
a
b
: INT
: ROM
: CARD
: CARD
Bank Button
i:INT r:ROM a:CARD b:CARD
While pressing and holding
the {BANK} button, pressing:
Will direct dial:
The lower {0} button i: INT (the Internal RAM bank)
The lower {1} button r: ROM (the ROM bank)
The lower {2} button a: CARD (the Card A bank)
The lower {3} button b: CARD (the Card B bank)
The lower {0} to {3} buttons are used to choose between i:INT, r:ROM, a:CARD and b:CARD
sounds. Note that if there is no card installed, or there is no sound data on the card, the
a:CARD and b:CARD banks will not be recognized.
The current Sounds bank and Seq/Preset bank are independent: changing one does not change
the other.

ENSONIQ KT-88 Specifications

General

Brand	ENSONIQ
Model	KT-88
Category	Keyboard
Language	English