ENSONIQ KT-88 Musician's Manual

Section 6 — Standard Sound Parameters
16 ENSONIQ KT Musician’s Manual
99
0
PEAK
BREAK
SUSTAIN
KEY DOWN
KEY UP
Voice is released
when envelope
gets to zero
Looped Voice
Voice is
assigned
AMP envelope
= Envelope
= Wave data
For a sustaining wave, when the envelope mode = FINISH:
= Envelope
= Wave data
99
0
PEAK
BREAK
KEY DOWN
KEY UP
SUSTAIN=0
Voice is
assigned
Looped Voice
AMP envelope
Voice is released
when envelope
gets to zero, even if
key is still down.
For unlooped, non-sustaining, waves (specifically those in the Percussion and Drum categories)
the voice becomes free as soon as the sample has played through to the end, no matter where the
envelope level is. The voice is released and is available for use by other sounds:
= Envelope
= Wave data
AMP envelope
99
0
PEAK
BREAK
SUSTAIN
KEY DOWN
KEY UP
"Percussion" sound
Voice is
assigned
Voice is free
regardless of
envelope
KeyboardTrk Range: -98 to +98
Makes the envelope times longer or shorter, depending on the key played. The scaling effect of
this parameter is based on a center break point of F4+.
Positive values will make all envelope times (except Release) shorter for keys above F4+, and
longer for keys below F4+. Negative values will have the opposite effect. Envelope times for F4+
are not affected by this parameter.

ENSONIQ KT-88 Specifications

General

Brand	ENSONIQ
Model	KT-88
Category	Keyboard
Language	English