Section 6 — Standard Sound Parameters
ENSONIQ KT Musician’s Manual 21
LFO Waveshapes
0
+100
-100
TRIANGLE SINE
POS/SINE POS/TRI SAWTOOTH
SQUARE
0
+100
-100
0
+100
-100
0
+100
-100
0
+100
-100
+50
+100
0
+50
+100
0
Restart Range: OFF or ON
Determines whether the LFO will restart with each keystrike: When set to OFF, the LFO will
cycle continuously without resetting. When set to ON, the LFO waveform will start from the
beginning of its cycle each time a new key is struck.
Tip: If you set the LFO Rate to 00, and the Restart parameter to ON, you can use the
LFO as a gated modulator with a variable depth. Use Wave = SQUARE, because it
starts high.