Section 10 — Understanding the Sequencer
ENSONIQ KT Musician’s Manual 21
tempo of a song, you are really setting the tempo offset, that is how much faster or slower than
the sequence tempo the song will be. The units are percentage points. Press {ENTER} when
you’re finished. The next display prompts you to save the song.
7. Press{ENTER} to save the song.
8. Now press the {EDIT_SEQ/PRESET} button. This places the KT in the Edit Sequence/Preset
mode.
9. Press the upper {3} button to “dial” the song command pages. Then press the lower {6}
button to display the Edit Song Steps page.
iSONG71 SNGS
Edit Song Steps
10. Press {YES}. The next display prompts you to confirm the step of the song you want to
change. Since we are assembling a new song in this example, and not editing an existing one,
we will begin with step 1.
11. Press the {>} button so that the phrase *END OF SONG* is flashing, meaning we can select a
sequence within the same bank and assign it as step 1 of our song.
Rep 1 Step 1
*END OF SONG*
12. Using the {[} button, scroll through the available sequences until the one you want to be step
1 is displayed.
13. Press the {<} button so that the step number is flashing. Then change the flashing “1” to a
“2” by pressing the {[} button once.
14. Repeat steps 11 through 13 until you are finished assembling your song.
15. To hear your song, press the (SELECT_SEQ/PRESET} button, and then press {PLAY}.
See Section 11 — Sequencer Parameters for more information about the Edit Song Step parameters.
To Next Page
Loading...
Need help?
General
