Section 4 — Effect Parameters
ENSONIQ KT Musician’s Manual 3
Out Range: -18 to +12 dB
Adjusts the output volume after the EQ.
Warning! Excessive gain levels may cause damage to your speakers
and/or hearing.
Rev Range: Various
Allows you to select one of the 16 pre-programmed reverb variations, as explained in Section 3 —
Understanding Effects.
Decay Bias Range: -7 to +7
This parameter offers fifteen pre-programmed decay time variations, for quick access in creating
custom effects. Positive values offer longer decay times, negative values shorten the decay times.
Note: Whenever the reverb variation (Rev) is changed, the Decay Bias parameter is
reset to +0, so that the reverb variation can be heard in its originally intended form.
Modulation Destinations
FX1-MIX FX2-MIX EQ1FREQ EQ1GAIN
EQ1BW EQ1OUT EQ2FREQ EQ2GAIN
EQ2BW EQ2OUT DECAY
To Next Page
Loading...
