ENSONIQ KT-88 Musician's Manual

Section 4 — Effects Parameters
18 ENSONIQ KT Musician’s Manual
Feedback Range: -98 to +98
Controls the amount of feedback applied to the chorus. Positive settings are in-phase, negative
values are out-of-phase, and impart a different tonality to the chorus.
Chorus Level Range: 00 to 99
Controls the Wet/Dry mix of the chorus itself.
Rev
Decay Bias
See the description in the Dual EQ+Reverb algorithm.
Modulation Destinations
FX1-MIX FX2-MIX FILT FC FILT QC
FC+QC DISTORT MIX CH RATE
CH DEPT CH CNTR CH FDBK CH LEVL
DECAY
Modulation Note
In this algorithm, there is an additional modulation destination (FC+QC) that allows you to
modulate both the Filter Fc and the filter Qc at the same time using the same mod source. By
using a modulator (such as the Mod Wheel with this setting, you can create the “wah” effect.

ENSONIQ KT-88 Specifications

General

Brand	ENSONIQ
Model	KT-88
Category	Keyboard
Language	English