Using the Printer Software with Windows 109
4
4
4
4
4
4
4
4
4
4
4
4
Setting the print server
❏ For Windows Me or 98, see “Setting up your printer as a
shared printer” on page 110.
❏ For Windows XP, 2000, or Server 2003, see “Using an
additional driver” on page 111.
Setting the clients
❏ For Windows Me or 98, see “With Windows Me or 98” on page
117.
❏ For Windows XP or 2000, see “With Windows XP or 2000” on
page 119.
Note:
❏ When sharing the product, be sure to set EPSON Status Monitor 3
so that the shared printer can be monitored on the print server. See
“Setting Monitoring Preferences” on page 92.
❏ When you are using a shared printer in a Windows Me or 98
environment, on the server, double-click the Network icon in
Control panel and make sure that the “File and product sharing for
Microsoft Networks” component is installed. Then, on the server
and clients, make sure that the “IPX/SPX-compatible Protocol” or
the “TCP/IP Protocol” is installed.
❏ The print server and clients should be set on the same network
system, and they should be under the same network management
beforehand.
❏ The screen may vary depending on your operating system version.
To Next Page
Loading...
Need help?
General
