20
a. fuser unit
b. cover B
c. cover C
❏ Do not insert your hand deep into the fuser unit as some
components are sharp and may cause injury.
❏ Avoid touching the components inside the product unless
instructed to do so in this guide.
❏ Never force the product’s components into place. Although
the product is designed to be sturdy, rough handling can
damage it.
❏ When handling a toner cartridge, always place them on a
clean, smooth surface.
❏ Do not attempt to modify a toner cartridge or take them apart.
They cannot be refilled.
❏ Do not touch the toner. Keep the toner away from your eyes.
❏ Do not dispose of used toner cartridge, photoconductor units,
or fuser units in fire, as they can explode and cause injury.
Dispose of them according to local regulations.
❏ If toner is spilled, use a broom and dustpan or a damp cloth
with soap and water to clean it up. Because the fine particles
can cause a fire or explosion if they come into contact with a
spark, do not use a vacuum cleaner.
❏ Wait at least one hour before using a toner cartridge after
moving it from a cool to a warm environment to prevent
damage from condensation.
To Next Page
Loading...
Need help?
General
