Scanning 207
6
6
6
6
6
6
6
6
6
6
6
6
5. Select Start Button from the Select an event list. Select Start
this program and then select a desired application from the
list.
Note:
❏ If Prompt for which program to run is selected, when the
button is pressed, a dialog box appears to prompt you to select
an application from the list.
❏ Some applications do not support linkage to scanners and
digital cameras. Linkage is available only to applications that
appear on the list.
6. To save your settings, click Apply and then OK.
Note:
You need to click Apply whenever you change a setting.
If you need to disable the Scanner events, select Take no action
in the product’s Properties dialog box.
For Windows Me, 98, and 2000 users
Note for Windows 98 and 2000 users:
Screen shots for Windows Me are used in this section, so they may differ
in appearance from what actually appears on your screen. The
instructions are the same.
1. Click Start, point to Settings, and then select Control Panel.
2. Double-click the Scanners and Cameras icon.
To Next Page
Loading...
Need help?
General
