Faxing (Fax Model Only) 249
8
8
8
8
8
8
8
8
8
8
8
8
2. Place your original either on the document table or in the Auto
Document Feeder. For details, see “Setting Your Originals”
on page 154.
3. Press the Speed Dial button on the control panel.
The registered recipient list appears in the LCD panel.
4. Press the u Up or d Down button several times until your
desired recipient is selected, then press the r Right button.
The selected recipient appears in the second top row in the
LCD panel.
Note:
❏ You can also select a recipient by entering the number directly.
❏ To display the details of the assigned recipient, press the
Advanced/Menu button while the recipient is selected. To
return to the list again, press either the Advanced/Menu
button or the l Left button.
5. Make the appropriate settings for your scanning purpose if
necessary.
You can specify the Document Size, Density, Image Quality,
Polling receptions, and Overseas transmission mode settings.
For details, see “Selecting the appropriate settings” on page
258.
To Next Page
Loading...
Need help?
General
