278 Faxing (Fax Model Only)
For One-touch dial
Assigning recipients
You can assign recipients from the registered speed dial list for
the One Touch Dial button A, B, or C.
1. Make sure the product is turned on, and then press the
Setup button.
The Setup light is lit and the Setup menu appears in the LCD
panel.
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
The Fax Settings menu appears.
3. Press the u Up or d Down button several times until Speed
Dial Settings appears, then press the r Right button.
4. Press the d Down button to select One-Touch Dial, and then
press the r Right button.
The One-Touch Dial list appears.
5. Press the d Down button to select one-touch dial A, B, or C
displayed as NONE, and then press the r Right button.
To Next Page
Loading...
Need help?
General
