Epson AcuLaser CX11 - Page 279

Faxing (Fax Model Only) 279
8
8
8
8
8
8
8
8
8
8
8
8
6. Press the d Down button to select a recipient you want to
assign for the One Touch Dial, and then press the r Right
button.
The selected recipient is assigned for the One Touch Dial A,
B, or C.
To change or delete a recipient assigned for the one-touch dial,
see “Reassigning recipients” on page 279 or “Deleting
recipients” on page 281.
Reassigning recipients
You can reassign recipients from the registered speed dial list for
the One Touch Dial button A, B, or C.
1. Make sure the product is turned on, and then press the
Setup button.
The Setup light is lit and the Setup menu appears in the LCD
panel.
2. Press the d Down button twice to select Fax Settings, then
press the r Right button.
The Fax Settings menu appears.