28 Getting to Know Your Printer
c. Error light
(Red)
On or flashes when an error has
occurred.
- On when an error has occurred that
requires operator intervention. The
product will automatically recover
when the cause of the error is resolved.
- Flashing 1 (blinks at 0.3 second
intervals)
Indicates an error has occurred that can
be recovered by pressing either the
x B&W Start or x Color Start button.
- Flashing 2 (blinks at 0.6 second
intervals)
Indicates an error has occurred that
requires operator intervention and the
x B&W Start or x Color Start button to
be pressed after resolving the error.
d. LCD panel Displays product status messages,
guidance information, and various
mode settings.
e. l Left/ r Right
button
Use these buttons to sequentially
display previous or next setting values.
The r Right button is also used as the OK
button to set and register a setting item.
Also, the l Left button can be used to
move the cursor one character left and
overwrite mistakenly entered data.
u Up/ d Down
button
Use these buttons to sequentially
display previous or next menu items.
For instructions on how to use these
buttons, see “Using the Setup Menu” on
page 288.
To Next Page
Loading...
