Using the Control Panel 305
9
9
9
9
9
9
9
9
9
9
9
9
3. Press the Setup button to enter the Setup mode. The Setup
light is lit and Setup menu appears in the LCD panel.
4. Make sure Printer Settings is selected, and then press the
r Right button. The Printer Settings menu appears.
5. Make sure Information Menu is selected, and then press the
r Right button.
6. Make sure Status Sheet is selected, and then press the
r Right button.
The Data light blinks and the product starts printing a status
sheet.
Note:
❏ Confirm that the information about the installed options is correct.
If the options are installed correctly, they appear under Hardware
Configurations. If the options are not listed, try reinstalling them.
❏ If the status sheet does not list your installed options correctly, make
sure that they are securely connected to the product.
❏ If you are unable to get the product to print a correct status sheet,
contact your dealer.
To Next Page
Loading...
Need help?
General
