324 Using the Control Panel
Network module error
The network module is installed incorrectly. Check if the network
module is installed correctly, and then turn on the product again.
If the error occurs again, contact your dealer or a qualified
customer support person for assistance.
Optional RAM error
A memory access error occurred. Check if the optional memory
is installed correctly, and then turn on the product again. If the
error occurs again, contact your dealer or a qualified customer
support person for assistance.
Scanner ADF error
This message appears when you turned on the product (fax
model) without the Auto Document Feeder installed. Install the
Auto Document Feeder correctly on the product, and then turn
on the product again. If the error occurs again, contact your dealer
or a qualified customer support person for assistance.
Service Req C2000
A system error occurred due to some cause.
To Next Page
Loading...
Need help?
General
