Working with Fonts 475
C
C
C
C
C
C
C
C
C
C
C
C
EPSON Codabar
❏ Four Codabar fonts are available, allowing you to enable and
disable the automatic insertion of check digits and OCR-B.
❏ The height of the bar code is automatically adjusted to 15% or
more of its total length, in conformance to the Codabar
standard. For this reason, it is important to keep at least one
space between the bar code and the surrounding text to
prevent overlapping.
❏ When either a Start or a Stop character is input, Codabar fonts
automatically insert the complementary character.
❏ If neither a Start nor a Stop character is input, these characters
are automatically input as the letter “A.”
The following codes are inserted automatically and need not be
input by hand:
❏ Left/Right quiet zone
❏ Start character (when not input)
❏ Check digit
Character type Numbers (0 to 9)
Symbols (- $ : / . +)
Number of characters No limit
Font size When OCR-B is not used: 26 pt or more (up
to 96 pt in Windows XP, 2000, and NT).
Recommended sizes are 26 pt, 52 pt, 78
pt, and 104 pt.
When OCR-B is used: 36 pt or more (up to
96 pt in Windows XP, 2000, and NT).
Recommended sizes are 36 pt, 72 pt, 108
pt, and 144 pt.
To Next Page
Loading...
